FISMA Compliance Handbook

In this excerpt from chapter 3 of the FISMA Compliance Handbook, author Laura P. Taylor discusses the five methodologies that agencies use as a basis to carry out FISMA compliance.

The following is an excerpt from the book FISMA Compliance Handbook written by Laura Taylor and published by Syngress. This section from chapter 3 discusses the five methodologies that agencies use as a basis to carry out FISMA compliance.

INTRODUCTION

There are five methodologies that agencies use as a basis to carry out FISMA compliance. The five methodologies are all slightly different, though the concepts among them are largely the same. Here's the list:

  • NIST Risk Management Framework
  • DIACAP
  • DoD RMF
  • DCID 6/3 → ICD 503
  • FedRAMP

There are some legacy methodologies, none of which are used anymore, though you may come across them in reference materials and those are DITSCAP, NIACAP, JAFAN 6/3, and NISCAP. You'll notice that we are starting to get heavy on acronyms. Some of the acronyms used in FISMA compliance are so well known that many people don't remember what the acronyms stand for anymore. Before I dive into the differences between these methodologies, I'm listing the acronyms and complete name in Table 3.1 for reference. If you're new to FISMA, don't let acronyms scare you off -- they're benign.

I won't be discussing much about the legacy methodologies, though I'll briefly touch on them near the end of this chapter for historical purposes. Some online job bulletin boards still reference the legacy methodologies, most likely because whoever wrote the job description doesn't realize that these methodologies are no longer in use. Similarly, some current government solicitations still reference these older methodologies -- likely because the government contracting officer does not realize that these legacy methodologies are no longer in use. Many government RFPs are built from templates that don't often get updated. For those reasons, these legacy methodologies are worth a mention in case you're ever steered into a discussion or proposal where these terms come up.

Although all federal agencies base their FISMA compliance program on one of the current methodologies, each agency's program is at the same time unique to that particular agency. No two compliance programs are exactly alike, with the exception of FedRAMP. Chapter 23 is dedicated to FedRAMP, so I won't be discussing it much prior to that chapter.

THE NIST RISK MANAGEMENT FRAMEWORK (RMF)

The NIST Risk Management Framework (RMF) was designed for unclassified information. Unclassified information used to be referred to as Sensitive But Unclassified (SBU), however, that terminology has been replaced with Controlled Unclassified Information (CUI). The framework for the NIST RMF methodology is described in a publication known as NIST Special Publication 800-37, Revision 1, Guide for Applying the Risk Management Framework. A copy of it is available online at http://www.csrc.nist.gov/publications/nistpubs/800-37-rev1/sp800-37-rev1-final.pdf.

The NIST standards and methodology are updated more frequently than any of the others. Additionally, the NIST high-level methodology document, SP 800-37 includes a vast amount of supporting documents that complement the foundational guidelines. Prior to updating their guidelines, NIST goes to a lot of trouble to solicit review and comments from both public and private industries, which greatly enhance the quality of their publications. They receive thousands of comments and painstakingly comb through each one of them -- intellectual crowdsourcing at its best.

FISMA Compliance Handbook

Author: Laura Taylor

Learn more about FISMA Compliance Handbook from publisher Syngress.

At checkout, use discount code PBTY14 for 25% off

The NIST guidance is well written and easy to follow. SP 800-37, Revision 1 provides a framework -- following it won't answer all your compliance questions as it leaves some room for interpretation to allow flexibility. Agencies and bureaus embracing the NIST RMF typically use NIST Special Publication 800-37, Revision 1 as a guide to develop their own internal process and handbook customized for their own unique requirements. In essence, NIST Special Publication 800-37, Revision 1 is a call to action and provides to agencies a "to do" list for information security program plans, information security control selection and implementation, policies, procedures, training, and security business processes that need to be put into place.

The NIST RMF process takes you through all the different steps of the security life cycle and this is discussed at a more in-depth level in Chapter 4. The different deliverables that are discussed in this book are consistent with the deliverables noted in the NIST RMF. I'll be talking more about the NIST RMF in Chapter 4.

DEFENSE INFORMATION ASSURANCE C&A PROCESS (DIACAP)

The Defense Information Assurance C&A Process (DIACAP) is the primary compliance methodology in place at U.S. Department of Defense agencies. DIACAP has been used by the Department of Defense since November 28, 2007. The overarching reference architecture for the DIACAP can be found in a document known as DoD Instruction 8510.01. That document can be found at the following URL: http://www.js.pentagon.mil/whs/directives/corres/pdf/851001p.pdf. DoD Instruction 8510.01 is comparable to the NIST SP 800-37, Revision 1 -- it provides the framework for the DoD C&A program. The baseline security controls that DIACAP uses can be found in DoDI 8500.2 -- an interesting read, even if you don't work for the Department of Defense. DoDI 8500.2 makes reference to various other security standards such as the Common Criteria Evaluation and Validation Scheme (CCEVS), NIST Federal Information Processing Standards (FIPS), and NIST FIPS 140-2. You can find 8500.2 at the following URL: http://www.dtic.mil/whs/directives/corres/pdf/850002p.pdf. The DIACAP life cycle is illustrated in Figure 3.1.

A unique element of DIACAP is that it focuses on the Global Information Grid (GIG). The GIG is a complex interconnection of systems, networks, and communication devices that operate with multilevel security using components that have well-defined mission assurance categories. Consisting of satellite systems, terrestrial systems, voice systems, and data systems, the GIG is an extremely complex and evolving network of communication systems. The GIG is made up of four different networks that are integrated together in various capacities. The four networks are known as NIPRNet, SIPRNet, NSANet, and JWICS. The four GIG network acronyms and the network security classifications are listed in Table 3.2.

SIPRNet's primary purpose is to transmit military orders. JWICS primary purpose is to transmit intelligence information to the military. NIPRNet is used primarily for nonclassified combat support, and there is an air gap between NIPRNet and SIPRNet. NSANet is used by the National Security Agency/Central Security Service for signals intelligence, communications monitoring, cryptology, and research. The Department of Defense offers a free online DIACAP training course that will help you better understand the DIACAP principles. You can access the course here: http://iase.disa.mil/eta/diacap/index.htm.

DEPARTMENT OF DEFENSE (DoD) RISK MANAGEMENT FRAMEWORK (RMF)

In the near future, the Department of Defense will be phasing out the DIACAP and replacing it with a new methodology known as the Department of Defense (DoD) Risk Management Framework (RMF). The DoD RMF is closely aligned with the NIST RMF and makes use of NIST security control baseline controls with additional controls added from Security Categorization and Control Selection for National Security Systems (CNSSI) 1253, published March 15, 2012. CNSSI 1253 is available at the following URL: http://www.cnss.gov/Assets/pdf/Final_CNSSI_1253.pdf. CNSSI 1253 prescribes minimum standards that national security systems must use, based on the definition of National Security System (NSS) as described in FISMA section 3542 as

...any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency -- "(i) the function, operation, or use of which -- "(I) involves intelligence activities;"(II) involves cryptologic activities related to national security; "(III) involves command and control of military forces; "(IV) involves equipment that is an integral part of a weapon or weapons system; or "(V) subject to subparagraph (B), is critical to the direct fulfillment of military or intelligence missions...

Read the full excerpt

Download the PDF of chapter 3 to learn more!

CNSSI was developed by the Joint Task Force Transformation Initiative Working Group and the Committee on National Security Systems (CNSS) working with representatives from the civil, defense, and intelligence communities. National Security Systems are systems that contain National Security Information (NSI). Classified NSI includes information determined to be either "Top Secret," "Secret," or "Confidential" under Executive order 12958,1 which was released by the White House office of the Press Secretary in April 1995.

National security systems are those systems related to intelligence activities, equipment that is an integral part of a weapons system, command and control of military forces, cryptologic activities related to national security, or equipment that is critical to the direct fulfillment of military of intelligence missions. NIST clarified the definition of National Security Systems in August 2003 when it released, NIST SP 800-59, Guideline for Identifying an Information System as a National Security System. More information on the DIACAP to DoD RMF transition can be found on the URL for the Joint Task Transformation Initiative Working Group here http://www.csrc.nist.gov/groups/SMA/ispab/documents/minutes/2012-10/ispab_oct2012_dcussatt_dod-rmf-transition-brief.pdf.

ICD 503 AND DCID 6/3

Intelligence agencies that come under the purview of the Office of the Director of National Intelligence use ICD 503 and DCID 6/3 for FISMA compliance. DCID 6/3 is the older of the two, and the goal is to phase it out. Old systems are still following DCID 6/3 until they are up for reaccreditation. ICD 503 was signed and went into effect on September 15, 2008.

DCID stands for Director of Central Intelligence Directive and 6/3 refers to the process described in Section 6, part 3 of the compendious Director of Central Intelligence Directives.2 The DCID 6/3 requires that systems be characterized by Protection Levels (PL), and DCID 6/3 defines five different protection levels. DCID 6/3 deals only with classified information, and its PL model was designed to ensure that only properly cleared people had access to classified information. The DCID Standards Manual defines the DCID 6/3 certification and accreditation process. DCID 6/3 makes use of the DCID 6/3 Policy Manual.

ICD 503 is more closely related to the NIST RMF than DCID 6/3. It refers to CNSS and NIST guidance and minimizes the amount of IC-specific guidance. An illustration of how ICD 503 incorporates CNSS and NIST documents is depicted in Figure 3.2. ICD 503 addresses policies for:

  • Risk Management
  • Accreditation
  • Certification
  • Reciprocity
  • Interconnections
  • Governance and Dispute Resolution

A key element of ICD 503 is that ICD 503 established joint Department of Defense and Director of National Intelligence (DNI) reciprocity objectives.

Many of the requirements for IC certification and accreditation are based on physical security, as classified information must always be physically secured. Aside from physical security, the IC puts a lot of emphasis on encryption. The emphasis in these two areas is what really sets the DCID 6/3 and ICD 503 apart other methodologies.

THE COMMON DENOMINATOR OF FISMA COMPLIANCE METHODOLOGIES

The common denominator of all the FISMA compliance methodologies, and this book, is that they are all based on three attributes: Confidentiality, Integrity, and Availability of information and information systems. All the methodologies include definitions for categorizing Confidentiality, Integrity, and Availability qualitatively. In all of the methodologies, information technology assets and controls must be categorized qualitatively by sensitivity related to Confidentiality, Integrity, and Availability.

Confidentiality of information is assurance that the information will not be disclosed to unauthorized persons or systems. Integrity of information is assurance that the information will not be altered from its original and intended form. Availability ensures that the information will be available as planned. Though Availability might seem so obvious at first that it is not worth mentioning, the reason it is important is because it forces the information owner to make provisions for contingencies and outages. Because Availability is important, FISMA compliance requires that contingency plans are developed and tested.

More on FISMA compliance from SearchSecurity

What is Federal Information Security Management Act (FISMA)?

FISMA essentials for information security practitioners

FISMA Compliance and the Evolution to Continuous Monitoring

FISMA compliance made easier with OpenFISMA

All the compliance methodologies call for accountability. Security accountability of IT systems means that activities can be traced back to a person or a process and that system users will be held accountable for their actions. One of the reasons that roles and responsibilities are clearly defined in every Security Package is to make it clear who is responsible for what. The different compliance methodologies described in this chapter are very similar in numerous ways. If you read all the guidance documentation for each, you might come to the conclusion that the different methodologies are essentially the same thing written from different perspectives.

For the most part, the recommendations in this book will apply to all methodologies unless I point it out otherwise. The guidance I will refer to most often will be the NIST RMF since it is more up to date than the guidance for the other methodologies. NIST guidance is also publicly available for anyone to review, and in that sense, it is the most open source of the compliance methodologies. It is not my intent to republish any of the methodologies.

Something to remember is that every agency, bureau, and department in the government that has built a robust and thorough security assessment and authorization process has their own unique requirements built into it.

FISMA COMPLIANCE FOR PRIVATE ENTERPRISES

The security assessment and authorization methodologies discussed in this book are well entrenched in U.S. federal agencies. However, there is nothing that says that these methodologies and practices cannot be adopted and used by private businesses, publicly traded corporations, and nonprofit organizations. As discussed in Chapter 2, in order to obtain new contracts under government task orders, government contractors must now sign agreements that stipulate that they are in compliance with FISMA. However, any organization can make use of these methodologies, whether they have government contracts or not.

As a result of Executive Order 13636,3 a group of experts is working on transforming much of NIST's guidance used for information security management of critical infrastructure which is primarily owned by the private sector. The group is known as the Integrated Task Force (ITF), and it is facilitated by the Department of Homeland Security. The ITF is composed of eight working groups with eight different focus areas:

Stakeholder Engagement
Cyber-Dependent Critical Infrastructure
Planning and Evaluation
Situational Awareness and Information Exchange
Incentives
Framework Collaboration with NIST
Assessments: Privacy, Civil Rights, and Civil Liberties
Research and development

Any organization that processes sensitive information should have a methodology for assessing and authorizing the security of their systems whether they are subject to regulatory laws or not. One of the goals of Executive Order 13636 is to create incentives for private sector companies to be more proactive about cyber security.

 

About the author:
Laura Taylor leads the technical development of FedRAMP, the U.S. government's initiative to apply the Federal Information Security Management Act to cloud computing. In 2006, Taylor's FISMA Certification and Accreditation Handbook was the first book published on FISMA. Taylor has contributed to four other books on information security and has authored hundreds of articles and white papers on infosec topics for a variety of web publications and magazines. Specializing in assisting federal agencies and private industry comply with computer security laws, Taylor is a thought leader on cyber security compliance. Taylor has led large technology migrations, developed enterprise wide information security programs, and has performed risk assessments and security audits for numerous financial institutions.

Dig Deeper on Security operations and management